CHDZJ - INSUL-COAT 445, COMPONENT B, 10-771

  • MSDS: CHDZJ
  • Manufacturer: E M CORP
  • Product Name: INSUL-COAT 445, COMPONENT B, 10-771
  • National Stock Number: 8010-00N018271
Product Identification

Product ID:INSUL-COAT 445, COMPONENT B, 10-771
MSDS Date:11/20/1997
FSC:8010
NIIN:00N018271
Kit Part:Y
MSDS Number: CHDZJ

Responsible Party
E/M CORP
2801 KENT AVE
WEST LAFAYETTE, IN 47906
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 317-497-6100

Cage: 0B070

Contractor
E/M CORP
2400 FT WORTH, TX 76117 US

Telephone: 817-834-8817

Cage: 0B070

Ingredients

ISOCYANIC ACID, HEXAMETHYLENE ESTER, POLYMERS; (ALIPHATIC

CAS: 28182-81-2

RTECS: NQ9170000

Fraction By Weight: 65-75%

OSHA PEL N/K

ACGIH TLV: 0.35 MG/M3 (MFR)


ACETIC ACID, 2-METHOXY-1-METHYLETHYL ESTER; (PM ACETATE)

CAS: 108-65-6

RTECS: AI8925000

Fraction By Weight: 10-20%

OSHA PEL N/K

ACGIH TLV: N/K


XYLENE (SARA 313) (CERCLA)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 10-20%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM/150 STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

LD50 LC50 Mixture:SEE INGREDIENT 3
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: CAN CAUSE IRRITATION,
REDNESS, BLURRED VISION. SKIN: PROLONGED CONTACT CAN CAUSE
IRRITATION, DERMATITIS. INHAL: CAN CAUSE IRRITATION, DIZZINESS,
NAUSEA, FATIGUE, HEADACHE AND UNCONSCIOUSN ESS OR ASPHYXIATION.
INGEST: CAN CAUSE GASTROINTESTINAL IRRITATION, NAUSEA, VOMITING,
AND DIARRHEA. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: TOXICITY: XYLENE IS MODERATE SKIN
IRRITANT IN RABBITS & SEVERE EYE IRRITANT. ALIPHATIC POLYISOCYANATE
IS SKIN, EYE & RESP IRRITANT. ACUTE ORAL LD50 (RAT) IS 15 GRAM/KG.
AMES TEST FOR THIS PO LYISOCYANATE, HOWEVER, WAS NEGATIVE.
POLYISOCYANATES ARE SENSITIZERS &, THEREFORE PRLNGD EXPOSURE TO THE
(SUPDAT)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:SKIN: WASH WITH SOAP AND WATER. EYES: FLUSH WITH COPIOUS
AMOUNTS OF WATER FOR AT LEAST 15 MINUTES, GET MEDICAL ATTN. INHAL:
MOVE TO FRESH AIR. IF BREATHING IS IMPAIRED, GET MEDICAL ATTN.
INGEST: DO NO T INDUCE VOMITING, KEEP WARM, GET MEDICAL ATTN.

Fire Fighting

Flash Point Method:TCC
Flash Point:80.0F,26.7C
Extinguishing Media:CO*2, FOAM, DRY CHEMICAL OR HALON.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . DO NOT EXTINGUISH WITH WATER.
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:CLEAN SPILL WITH ABSORBENT MATERIAL. ELIMINATE
IGNITION SOURCES. WEAR GLOVES, GOGGLES AND GAS MASK IF TWA'S ARE
EXCEEDED.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:PROTECT FROM PHYSICAL DAMAGE. STORE IN
COOL, DRY, VENTILATED AREA AWAY FROM ACIDS, ALKALIS AND OPEN
FLAMES.
Other Precautions:NONE.

Exposure Controls

Respiratory Protection:NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EFTS OF OVEREXP: ISOCYANATE VAPOR SHOULD BE AVOIDED.

Chemical Properties

Vapor Density:>1
Spec Gravity:1.08
VOC Pounds/Gallon:275
Evaporation Rate & Reference:<1 (BUTYL ACETATE =1)
Solubility in Water:SLIGHT
Appearance and Odor:LIGHT AMBER LIQUID, ORGANIC SOLVENT ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, AVOID CONT W/WATER, ALCOHOLS, AMINES, STRONG
BASES, METAL COMPOUNDS/SURFACE ACTIVE MATERIALS.
Stability Condition to Avoid:OPEN FLAME, CONTACT WITH MOISTURE OR OTHER
MATERIALS THAT REACT WITH ISOCYANATES.
Hazardous Decomposition Products:IRRITATING AND/OR TOXIC FUMES
INCLUDING CO, CO*2 AND NO*X MAY BE RELEASED.
Conditions to Avoid Polymerization:REACTS WITH WATER.

Disposal

Waste Disposal Methods:DISPOSE OF WASTE IN A CHEMICAL LANDFILL AS
APPROVED BY CURRENT LOCAL, STATE AND FEDERAL LAWS AND REGULATIONS.

Other Information

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.